Forces in molecular recognition: Comparison of experimental data and molecular mechanics calculations

Summary NMR studies of the rotation barrier of the disaccharide of the glycopeptide antibiotic vancomycin have been used to test the performance of computer simulation techniques using molecular mechanics. In the absence of any solvated water, no correlation could be found between experiment and calculation. By introducing solvent water molecules into the binding region of the antibiotic, the NMR results could be simulated both qualitatively and quantitatively within experimental error without using massive computational resources.     

离子敏感场效应晶体管及其应用

离子敏感场效应晶体管具有若干不同于寻常传感器的特点：超小型、全固态、集成化和自身阻抗变换等。它是一种很有发展前途的传感器。本文了讨论了离子敏感场效应晶体管的分类、结构和性能；评述了１９８９年以来其在临床医学和流动注射分析等方面的应用。引参考文献６７篇。     

Vibronic intensities in centrosymmetric lanthanide complex ions. I

Summary A theoretical model to calculate the vibronic intensities induced by the odd vibrational modes in centrosymmetric lanthanide complexes is developed and applied to octahedral complex ions, LnX ₆ ^3– , such as occur in the hexachloroelpasolites Cs₂NaLnCl₆. Both the crystal field and the ligand polarisation contributions are evaluated using a standard set of symmetry coordinates. For the crystal field term a truncated expansion of the intermediates states is employed rather than the more conventional closure approximation. Special care is necessary to ensure that the phases of the contributions are correctly determined since the cross-term between the ligand polarisation and crystal field contributions is signed. General equations applicable to anyf ⁿ complex ion are derived and an example of their application to the PrCl ₆ ^3– ion is given The agreement with experiment is satisfactory.     

A new imidazolylquinoline for organic thin film transistor

A new active electronic material, 2-(naphtho[3,4]imidazol-2-yl)quinoline (NIQ), 1, has been synthesized and fully characterized. This compound exhibits field-effect carrier mobility and behaves as a p-type semiconductor (μ_FET = 0.148 cm²/V s at V_DS = 10 V). NIQ and its related imidazolylquinoline compounds may have possible applications as active materials in organic thin film transistors.     

高活性钛镀铂电极

在电沉积过程中采用超声波振荡技术，选择最佳条件可制备牢固高活性然镀铂电极，超声波振荡技术改善他镀层与基底的粘结力。电极活性与双层电容有关，并旭因于表面粗糙度。     

人参中总皂甙的超声波快速提取方法研究

建立了人参中总皂甙超声波半微量快速提取方法，与索氏提取法相比，此法提取时间由索氏法的1－2个工作日缩短到30min，节省大量试剂，综合提取效率提高数十倍，与索氏提取法对照分析表明，此法可完全满足人参中总皂甙的快速测定要求。     

Selective spectrophotometric determination of TNT in soil and water with dicyclohexylamine extraction

Contaminated land and groundwater remediation in military waste dumping sites often necessitates the use of simple, cost-effective, and rapid tests for detecting trinitrotoluene (TNT) residues in the field along with their dinitro-analogues. A simple, rapid, low-cost, and field-adaptable (on-site) colorimetric method was developed for quantifying TNT in the presence of RDX, PETN, picric acid, 2,4-DNT (dinitrotoluene), dinitrophenol, and dinitroaniline. Most commercialized methods for TNT assay-with the exception of Cold Regions Research and Engineering Laboratory of the U.S. Army (CRREL) method-use proprietary chemicals, and the color stability and intensity are highly dependent on the composition of the organic solution comprised of acetone or methanol. The developed colorimetric method is based on the extraction of TNT from water-acetone solution into an organic solvent mixture of dicyclohexylamine (DCHA)-isobutyl methyl ketone (IBMK) (10:1, v/v), filtration through a filter paper into a stoppered optical cell containing anhydrous sodium sulfate, and measurement of the absorbance of the organic extract at 531 nm after 5 min. The red-violet color of the extract was due to intermolecular charge-transfer (CT) between the electron attracting TNT and electron-donating DCHA, and the molar absorptivity for TNT in final organic solution was (1.16 ± 0.02) × 10⁴ L mol⁻¹ cm⁻¹.The R.S.D. of the slope of calibration line was 0.7%. The LOD of the method in the final organic phase was 0.38 μM TNT, and LOD values expressed on the basis of original soil TNT content were 0.5, 1.3, and 1.5 ppm (μg g⁻¹) for clay, loamy clay, and sandy soils, respectively. Unlike other spectrophotometric methods, the developed assay was basically tolerant to common cations and anions found in soil and water at 100-fold weight ratios, and to soil humic acids. Among a number of compounds that may be encountered in polynitro-explosive storage and waste reclaimation sites such as picric acid, dinitrophenol, 2,4-dinitrotoluene, dinitroaniline, RDX, PETN, and tetryl, only tetryl interfered with the developed TNT assay. Water tolerance and exploitability over a wide pH range were other superiorities over the CRREL method. The CT-complex was relatively stable, as the absorbance of the organic extract was not significantly influenced from the dilution of the water-acetone phase. Aside from the extractive-photometric procedure established for aqueous solutions, a simulated field colorimetric assay for TNT directly applicable to soil was also devised, based on direct color development in a 4:1 (v/v) acetone-dicyclohexylamine organic extract of soil at a liquid-to-solid ratio of 5 mL g⁻¹.     

Development and validation of a capillary electrophoresis method for the determination of phenothiazines in human urine in the low nanogram per milliliter concentration range using field-amplified sample injection

A capillary zone electrophoresis (CZE) method with ultraviolet-visible detection has been established and validated for the determination of five phenothiazines: thiazinamium methylsulfate, promazine hydrochloride, chlorpromazine hydrochloride, thioridazine hydrochloride, and promethazine hydrochloride in human urine. Optimum separation was obtained on a 64.5 cm x 75 microm bubble cell capillary using a buffer containing 150 mM tris(hydroxymethyl)aminomethane and 25% acetonitrile at pH 8.2, with temperature and voltage of 25 degrees C and 20 kV, respectively. Naphazoline hydrochloride was used as an internal standard. Field-amplified sample injection (FASI) has been applied to improve the sensitivity of the detection. Considering the influence of parameters affecting the on-line preconcentration (nature of preinjection plug, sample solvent composition, injection times, and injection voltage) and due to the significant interactions among them, in this paper we propose for the first time the application of a multivariate approach to carry out the study. The optimized conditions were as follows: preinjection plug of water for 7 s at 50 mbar, electrokinetic injection for 40 s at 6.2 kV, and 32 microm of H3PO4 in the sample solvent. Also, a solid-phase extraction (SPE) procedure is developed to obtain low detection limits and an adequate selectivity for urine samples. The combination of SPE and FASI-CZE-UV allows adequate linearities and recoveries, low detection limits (from 2 to 5 ng/mL), and satisfactory precisions (3.0-7.2% for an intermediate RSD %).     

Ultrasonic and Raman Scattering Spectroscopy of Zinc Thiocyanate Complexes in Water at 25<Superscript>∘</Superscript>C: Kinetics of Complex Formation Determined by Multivariate Analysis

Advances have been made recently in broadening the accessible ultrasonic absorption frequency range and improving the detectability of minor species present in solution using Raman spectroscopy. Development of chemometric techniques in these areas needs to keep pace with the improvement of these experimental methods. Refinements in the analysis of ultrasonic and Raman data based on multivariable least squares and factor analysis, respectively, are examined to investigate the kinetics of zinc thiocyanate complex formation in water. Analysis of ultrasonic absorption relaxation spectra verified that the observed process in aqueous Zn(SCN)₂ involves substitution of water from the first coordination shell of Zn²⁺. Use of a multivariable least-squares error surface is described that enhances the reliability of assigned frequencies of ultrasonic absorption maxima. Factor analysis of Raman scattering data provided direct evidence that at least four complex species, such as Zn(SCN)⁺ and Zn(SCN)₂, are simultaneously present in the aqueous zinc thiocyanate solutions.     

Use of x-ray microtomography to visualise dynamic adsorption of organic vapour and water vapour on activated carbon

X-ray microtomography coupled with image analysis was used to quantify the adsorption of vapours on activated carbon beds. This technique was tested using three different challenges: CCl₄, water vapour and a mixture of water- and organic vapour. It is shown that the used technique allows determining the adsorption front progress in the case of organic vapour and mixture of water and organic vapour whereas the existence of this front was not so obvious in the case of water vapour. Experimental results obtained for organic vapours were interpreted on the basis of the Wheeler-Jonas equation: a good agreement was found between experimental and theoretical breakthrough times.